| Sign In | Join Free | My burrillandco.com |
|
| Ask Lasest Price | |
| Brand Name : | PF |
| Model Number : | R4D0-FB-IA12.0 |
| Certification : | ATEX |
| Price : | USD98.00/PC |
| Payment Terms : | Alipay |
| Supply Ability : | 100pcs per month |
| Delivery Time : | 12-14 weeks |
PEPPERL FUCHS Fieldbus Barrier R4D0-FB-IA12.0
| Product Description |
|---|
| Fieldbus barrier, module for DIN rail mounting |
| General specifications | ||
|---|---|---|
| Design / Mounting | Cabinet installation | |
| Installation in hazardous area | Zone 1 / Div. 2 | |
| Fieldbus connection | ||
| Power dissipation | see table 1 | |
| Main cable (Trunk) | ||
| Rated voltage | 16 ... 32 V DC , min. 15 V in case of brown out | |
| Rated current | trunk IN to trunk OUT max. 2 A see table 1 | |
| Cable shield grounding option | Capacitive via 5.7 nF Direct | |
| Voltage drop | trunk IN to trunk OUT 100 mV max. | |
| Number of couplers | max. 3 per segment | |
| Reverse polarity protection | Built-In | |
| Outputs | ||
| Number of outputs | 8, 10 or 12 | |
| Number of devices per output | 1 | |
| Cable length | 120 m | |
| Rated voltage | 10 ... 14 V | |
| Rated current | max. 43 mA at one spur , max. 320 mA total current at all spurs | |
| Short-circuit current | 53 mA , 1 mA in fallback state | |
| Cable shield grounding option | Capacitive via 4.4 nF | |
| Surge protection | Trunk overvoltage protection if voltage exceeds typ. 39 V, max. 41 V | |
| Diagnostic and Protection Features | ||
| Fault Isolation | Short Circuit Current Limitation at spurs Bounce Protection at spurs Signal inhibit at spurs | |
| Physical Layer Diagnostic | Signal level at spurs Signal jitter at spurs Noise level at spurs | |
| Indicators/operating means | ||
| Switch | S1 ON: diagnostic alarms activated S2 ON: diagnostic warnings activated S3-S8: not used | |
| LED PWR | green: Fieldbus voltage > 16 V | |
| LED COM/ERR | yellow flashing: fieldbus communication and physical layer status , red: Hardware error | |
| LED SPURS | red: 2 Hz flashing in short-circuit condition | |
| Galvanic isolation | ||
| Main wire/outputs | isolation is not affected by interference according to EN 60079-11, voltage peak value 375 V | |
| Output/Output | No Isolation | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 | |
| Standard conformity | ||
| Electromagnetic compatibility | NE 21:2011 | |
| Degree of protection | IEC/EN 60529 | |
| Fieldbus standard | IEC 61158-2 | |
| Climatic conditions | IEC 60721 | |
| Shock resistance | EN 60068-2-27 | |
| Vibration resistance | EN 60068-2-6 | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | < 95 % non-condensing | |
| Shock resistance | 15 g 11 ms | |
| Vibration resistance | 1 g , 10 ... 150 Hz | |
| Corrosion resistance | acc. to ISA-S71.04-1985, severity level G3 | |
| Mechanical specifications | ||
| Connection type | screw terminal , pluggable or spring terminal , pluggable | |
| Core cross section | see table 2 | |
| Housing material | Polycarbonate | |
| Degree of protection | IP20 | |
| Mass | 2100 g | |
| Dimensions | see dimensions | |
| Mounting | DIN rail mounting | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | BVS 13 ATEX E 121 X | |
| Marking | ||
| Main cable (Trunk) | ||
| Maximum safe voltage Um | 253 V AC | |
| Outputs | in accordance to FISCO and Entity | |
| Power | 1.063 W | |
| Voltage | 17.1 V | |
| Current | 248.55 mA | |
| Inductance | gas group IIC 470 µH , gas group IIB 2 mH | |
| Capacitance | gas group IIC 367 nF , gas group IIB 2.15 µF | |
| Directive conformity | ||
| Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012 , EN 60079-18:2015 | |
| International approvals | ||
| CSA approval | CSA 14.70004139 | |
| Control drawing | 116-0400 | |
| Approved for | Class I, Division 2, Groups A, B, C, D T4 Class I, Zone 1, AEx/Ex e ib mb [ia Ga] IIC T4 Gb Class I, Zone 1, AEx/Ex e ib mb [ia IIC Da] IIC T4 Gb Associated equipment for Class I, Division 1 Groups A, B, C, D Associated equipment for Class II, Division 1 Groups E, F, G Associated equipment for Class III, Division 1 | |
| IECEx approval | IECEx BVS 13.0119X | |
| Approved for | Ex eb ib mb [ia Ga] IIC T4 Gb [Ex ia Da] IIIC [Ex ia Ma] I | |
| Certificates and approvals | ||
| FOUNDATION Fieldbus | FF-846 | |

Are the Products Genuine OEM Units?
These items have been certified by Achievers Automation Limited to be genuine OEM Units obtained through OEM or independent third-party channels.
Does Achievers sell to international Non-USA customers?
Yes, Achievers offers services to clients around the globe. In fact, a large portion of our company is international, and we have experience shipping to locations all over the world.
|